|
Final Details
It would be nice if both shelves matched but using the leftover
material worked great. And before I installed both shelves, I sanded the
front edge so they won't give my any splinters.
|
|
 |
I found these hooks laying around so I
thought I'd put them to good use.
|
|
 |
The hooks worked perfect to hold my four foot pipe clamp extensions.
This way I'll always have them handy.
|
|
 |
And I threaded on the couplers as well.
|
|
 |
|
It's Finished
Here it is all finished.
|
|
 |
The T-Track came out very nice and I'd do this method again in the
future.
|
|
 |
The sides and back are slightly inset which was planned from the start.
And the edge molding gives it a finished look.
|
|
 |
Here is one big reason I made this mobile table, so it can be used as an
out-feed table for my saw. This will work much better than using saw
horses and a piece of wood.
|
|
 |
These T-Track accessories should come in very handy. Notice the
raised area that rides in the slot. Two are vertical and two are
horizontal so you have options.
|
|
|
|
This makes locating something very easy... depending on what you're
doing of course.
|
|
 |
|
1
2
3
4
5
6
7 |
